| doc. dr. Damijan Zorko | Fast evaluation of tooth bending fatigue strength of polymer gears | 01.10.2021 - 30.09.2023 |
| prof. dr. David Stopar (vodja projekta s strani UL FS izr. prof. dr. Matija Jezeršek) | Laser assisted removal of biofilms associated with periodontal and peri-implant diseases | 01.10.2021 - 30.09.2024 |
| doc. dr. Andrej Svete | Advanced shock tube system for high-frequency primary dynamic pressure calibration | 01.10.2021 - 30.09.2024 |
| dr. Borut Černe | Renewable bio-based composite gears – development and performance evaluation using enhanced experimental analyses and numerical simulations | 01.10.2021 - 30.09.2023 |
| prof. dr. Andrej Kitanovski | TCCbuilder: An open-source simulation tool for thermal control circuits | 01.10.2021 - 30.09.2024 |
| prof. dr. Matevž Dular | Controlled generation of microbubbles and exploration of their physics for exploitation in chemistry, biology and medicine | 01.10.2021 - 30.09.2024 |
| izr. prof. dr. Peter Gregorčič | Engineering of future innovative and smart hybrid materials by combining laser-functionalized metals and living cells (LaserInSMArT) | 01.10.2021 - 30.09.2024 |
| doc. dr. Martin Petkovšek | Controlling extreme cavitation conditions by laser tailoring of surface functionalities (eCATS) | 01.10.2021 - 30.09.2024 |
| izr. prof. dr. Gregor Klančar (vodja projekta s strani UL FS doc. dr. Rok Vrabič) | Development of a self-learning system for optimizing the driving rules of autonomous transport vehicles and their temporally and spatially coordinated activities | 01.10.2021 - 30.09.2024 |
| prof. dr. Janko Slavič | Single-process 3D Printed Dynamic Sensors | 01.10.2021 - 30.09.2024 |
| prof. dr. Rok Petkovšek | Generation of ultra-short laser pulses for very high speed and highly adaptable parallel microprocessing | 01.10.2021 - 30.09.2024 |
| prof. dr. Marko Hočevar | Low emission household tumble drying with evaluation of damage to textile materials | 01.10.2021 - 30.09.2024 |
| doc. dr. Rok Zaplotnik (vodja projekta s strani UL FS prof. dr. Matevž Dular) | Waterborne virus inactivation efficiency of a prototype device combining non-equilibrium plasma and hydrodynamic cavitation | 01.10.2021 - 30.09.2024 |
| prof. dr. Irena Drevenšek Olenik (vodja projekta s strani UL FS izr. prof. dr. Matija Jezeršek) | Magneto Responsive Surfaces for Manipulation of Light and Liquids | 01.10.2021 - 30.09.2024 |
| izr. prof. dr. Miroslav Halilovič | Development of technical guidelines for quadruple glazing | 01.10.2021 - 30.09.2024 |
| doc. dr. Lidija Slemenik Perše | Sustainable use of polymers in home appliances – Prediction of long-term viscoelastic behavior | 01.10.2021 - 30.09.2024 |
| doc. dr. Sabina Kolbl Repinc (vodja projekta s strani UL FS prof. dr. Marko Hočevar) | Development of an optical measuring method for measurement of the turbulent two-phase flow with free surface | 01.10.2021 - 30.09.2024 |
| prof. dr. Božidar Šarler | Advanced simulation and optimization of the entire process route for production of topmost steels | 01.10.2021 - 30.09.2024 |
| prof. dr. Tomaž Katrašnik | Preparation of expert documents, design of a database and development of a vehicle simulation model for calculation of the energy and environmental footprint with an aim to optimize implementation of the public transport service | 01.09.2021 - 31.08.2024 |
| izr. prof. dr. Marija Klopčič (vodja projekta s strani UL FS doc. dr. Janez Benedičič) | Development of sustainable barn construction concepts | 01.11.2020 - 31.10.2022 |
| prof. dr. Stanislav Trdan (vodja projekta s strani UL FS prof. dr. Marko Hočevar) | Management of brown marmorated stink bug in Slovenia | 01.11.2020 - 31.10.2023 |
| prof. dr. Mitjan Kalin | Tribological surface design with advanced metal additive manufacturing - TriboADAM | 01.09.2020 - 31.08.2023 |
| prof. dr. Tomaž Katrašnik | Advanced multi-scale modelling of NMC cathode materials for enhanced next-generation energy storage systems | 01.09.2020 - 31.08.2023 |
| dr. Umut Hanoglu (vodja projekta s strani UL FS prof. dr. Božidar Šarler) | Simulation of hot rolling for topmost steel grades | 01.09.2020 - 31.08.2023 |
| prof. dr. Domen Leštan (vodja projekta s strani UL FS prof. dr. Matevž Dular) | Method for decontamination of sewage sludge and sludge products for their sustainable use as phosphorous fertilizers | 01.09.2020 - 31.08.2023 |
| izr. prof. dr. Miha Brojan | Development of quasi-periodic deformation patterns in viscoelastic structures | 01.09.2020 - 31.08.2023 |
| dr. Andrej Kastrin (vodja projekta s strani UL FS izr. prof. dr. Janez Povh) | Research collaboration prediction using literature-based discovery approach | 01.09.2020 - 31.08.2023 |
| izr. prof. dr. Tomaž Pepelnjak | Adaptable hardening of austenitic steel surfaces by cryogenic forming processes | 01.09.2020 - 31.08.2023 |
| prof. dr. Andrej Kitanovski | MagBoost: Magnetocaloric booster micro-heat pump for district heating system | 01.09.2020 - 31.08.2023 |
| prof. ddr. Janez Žerovnik | Stochastic models for logistics of industrial processes | 01.09.2020 - 31.08.2023 |
| prof. dr. Tone Lerher (vodja projekta s strani UL FS izr. prof. dr. Boris Jerman) | Warehousing 4.0 – Integration model of robotics and warehouse order-picking systems | 01.09.2020 - 31.08.2023 |
| doc. dr. Matevž Zupančič | Enhanced boiling heat transfer utilising hierarchical functionalized surfaces (eHEATs) | 01.09.2020 - 31.08.2023 |
| prof. dr. Božidar Šarler | Modelling for thermal control of Plasma Facing Components (PFCs) in fusion reactors | 01.03.2020 - 28.02.2022 |
| prof. dr. Miha Boltežar | Vision based reduced order modeling approach for operational parameter identification of nonlinear finite element models | 01.01.2020 - 31.12.2023 |
| prof. dr. Jernej Klemenc | Analysis of failures that were detected at technical inspection procedures by using conventional statistical methods and data mining methods | 01.11.2019 - 31.10.2022 |
| doc. dr. Andreja Kukec (vodja projekta na UL FS prof. dr. Sašo Medved) | Development of the prognostic model of exposure to indoor air pollutants in schools and preparation of evidence based measures for planning of efficient natural ventilation of the classrooms | 01.11.2019 - 31.10.2021 |
| doc. dr. Martin Petkovšek | Cavitation - a solution for microplastics degradation? | 01.07.2019 - 30.06.2022 |
| prof. dr. Spomenka Kobe (vodja projekta na UL FS doc. dr. Lidija Slemenik Perše) | Development of complex shape multicomponent permanent magnets with the use of advanced 3D printing technology | 01.07.2019 - 30.06.2022 |
| doc. dr. Tine Seljak | Zero-footprint combustion for green power generation | 01.07.2019 - 30.06.2021 |
| izr. prof. dr. Peter Gregorčič | Laser micro and nano structuring for development of biomimetic metallic surfaces with unique properties (LaMiNaS) | 01.07.2019 - 30.06.2022 |
| prof. dr. Barbara Malič (vodja projekta na UL FS prof. dr. Andrej Kitanovski) | Electrocaloric elements for active cooling of electronic circuits | 01.07.2019 - 30.06.2022 |
| izr. prof. dr. Anton Bergant (vodja projekta na UL FS prof. dr. Božidar Šarler) | Modelling of trapped air pockets in hydraulic piping systems | 01.07.2019 - 30.06.2022 |
| doc. dr. Marko Polajnar | Novel design of EHL contacts by employing solid-liquid interface phenomena | 01.07.2019 - 30.06.2021 |
| prof. dr. Franci Pušavec | Development and implementation of innovative machining technology for machining ZnO based ceramics with defined cutting geometry, in serial production, to increase the quality of varistors as final products | 01.07.2019 - 30.06.2022 |
| prof. dr. Matjaž Godec (vodja projekta na UL FS izr. prof. dr. Peter Gregorčič) | New Conventional and Additive Manufactured Biodegradable Fe-Mn alloy with Tailored Biodegradability | 01.07.2019 - 30.06.2022 |
| izr. prof. dr. Matija Jezeršek | Laser-induced subsurface microdestruction of tissue (LasDes) | 01.07.2019 - 30.06.2022 |
| prof. dr. Janko Slavič | High-speed-camera based high-spatial-density sensing of 3D vibrations with applications in digital-twins and remote sensing | 01.07.2019 - 30.06.2022 |
| dr. Gregor Dolanc (vodja projekta na UL FS prof. dr. Mihael Sekavčnik) | Optimization based control of P2G converter connected to hydro power plant | 01.07.2019 - 30.06.2022 |
| prof. dr. Božidar Šarler | Advanced meshless modelling and simulation of multiphase systems | 01.07.2019 - 30.06.2022 |
| prof. dr. Miha Boltežar | Hybrid Dynamic Substructuring in the Industry of Home Appliances | 01.07.2019 - 30.06.2022 |
| dr. Alexandra Aulova | Neural networks for determination of polymer creep response at different temperatures | 01.07.2019 - 30.06.2021 |
| doc. dr. Lidija Slemenik Perše | Rheological behavior and mechanical properties for processing of highly filled powder – polymer systems | 01.11.2018 - 31.10.2021 |
| prof. dr. Maja Ravnikar (vodja projekta na UL FS prof. dr. Matevž Dular) | Development of new, environment-friendly approaches for plant and human virus inactivation in waters | 01.07.2018 - 30.06.2021 |
| dr. Urban Tomc | Digital microfluidics in magnetocaloric refrigeration | 01.07.2018 - 30.06.2020 |
| prof. dr. Rok Petkovšek | Ultrashort pulses on demand | 01.07.2018 - 30.06.2021 |
| doc. dr. Hana Uršič Nemevšek (vodja projekta na UL FS prof. dr. Andrej Kitanovski) | Multicaloric cooling | 01.07.2018 - 30.06.2021 |
| viš. znan. sod. dr. Tomaž Požar | Spatial and temporal shaping of laser light for minimally invasive ophthalmic procedures | 01.07.2018 - 30.06.2021 |
| prof. dr. Mitjan Kalin | Nano-engineered Green lubrication technology for sustainable high-performance stamping | 01.07.2018 - 30.06.2021 |
| doc. dr. Miha Brojan | Crystallography of wrinkled elastic surfaces | 01.07.2018 - 30.06.2021 |
| prof. dr. Božidar Šarler | Multiphysics and multiscale numerical modelling for competitive continuous casting | 01.07.2018 - 30.06.2021 |
| izr. prof. dr. Janez Povh | Extending first and second order algorithms for nested classes of optimization problems to solve computationally challenging industrial questions | 01.01.2018 - 31.12.2020 |
| dr. Nataša Pržulj (vodja projekta na UL FS izr. prof. dr. Janez Povh) | Biomedical data fusion using a non-negative matrix tri-factorization | 01.05.2017 - 30.04.2020 |
| izr. prof. dr. Franci Pušavec | Development and implementation of cryogenic machining into serial production industry for increasing productivity of drilling and milling processes | 01.05.2017 - 30.04.2020 |
| izr. prof. dr. Matej Vesenjak (vodja projekta na UL FS prof. dr. Marko Nagode) | Development of multifunctional auxetic cellular structures | 01.05.2017 - 30.04.2020 |
| dr. Matija Milanič (vodja projekta na UL FS izr. prof. dr. Matija Jezeršek) | Combined multispectral and thermographic imaging for screening and monitoring of small joint arthritis | 01.05.2017 - 30.04.2020 |
| izr. prof. dr. Janez Kovač (vodja projekta na UL FS doc. dr. Damjan Klobčar) | Selective plasma oxidation of FeCrAl alloys for extended-lifetime of glow plugs for diesel engines | 01.05.2017 - 30.04.2020 |
| doc. dr. Martin Petkovšek | Scale effects in acoustic cavitation in various liquids with dimensionless number definition | 01.05.2017 - 30.04.2019 |
| doc. dr. Vid Agrež | High power highly adaptable fiber lasers for the industrial applications | 01.05.2017 - 30.04.2020 |
| prof. dr. Tomaž Katrašnik | Next-generation electrochemical LiFePO4 battery model | 01.05.2017 - 30.04.2020 |
| izr. prof. dr. Janez Povh | High-Performance Solver for Binary Quadratic Problems | 01.01.2017 - 31.12.2019 |
| dr. Viktor Jejčič (vodja projekta na UL FS doc. dr. Janez Benedičič) | Technological solutions for high – quality hay production | 01.10.2016 - 30.09.2019 |
| izr. prof. dr. Aleš Fidler (vodja projekta na UL FS izr. prof. dr. Matija Jezeršek) | Optodynamic optimization of laser root canal irrigation | 01.03.2016 - 28.02.2019 |
| prof. dr. Andrej Kitanovski | Advanced electrocaloric energy conversion | 01.03.2016 - 28.02.2019 |
| prof. dr. Nataša Zabukovec Logar (vodja projekta na UL FS izr. prof. dr. Uroš Stritih) | Advanced heat storage materials for integrated storage solutions | 01.03.2016 - 28.02.2019 |
| prof. dr. Igor Emri | Elecrospun nanofibrous materials for solid state drug delivery system | 01.03.2016 - 28.02.2019 |
| prof. dr. Đani Juričić (vodja projekta na UL FS prof. dr. Mitjan Kalin) | E-maintenance of electro-mechanical drives: prognostics and health management solutions under non-stationary operating conditions | 01.03.2016 - 28.02.2019 |
| prof. dr. Ester Heath (vodja projekta na UL FS prof. dr. Marko Hočevar) | Improved treatment and monitoring of Water Framework Directive priority pollutants | 01.03.2016 - 28.02.2019 |
| prof. dr. Mitjan Kalin | Nanoscale engineering of the contact interfaces for green lubrication technology | 01.01.2016 - 31.12.2018 |
| doc. dr. Jaka Tušek | From the elastocaloric effect to the efficient cooling device | 01.01.2016 - 31.01.2018 |
| izr. prof. dr. Martin Milanič (vodja projekta na UL FS prof. ddr. Janez Žerovnik) | Independence in domination in structured graph classes | 01.01.2016 - 31.12.2018 |
| prof. dr. Zdravko Kutnjak (vodja projekta na UL FS prof. dr. Andrej Kitanovski) | New advanced electrocaloric materials for novel environmentally-friendly dielectric refrigeration technology | 01.07.2014 - 30.06.2017 |
| prof. dr. Miha Boltežar | Vibrational fatigue in automotive industry | 01.07.2014 - 30.06.2017 |
| prof. dr. Igor Emri | Improvement of flowability and density of feedstock used in nanoPowder Injection Moulding (nanoPIM) | 01.07.2014 - 30.06.2017 |
| prof. dr. Janko Slavič | Smart Systems and Structural Dynamics | 01.07.2014 - 30.06.2017 |
| izr. prof. dr. Franci Pušavec | Development and production of taylor made milling tools, coatings and corresponding manufacturing technologis in individual tooling industry | 01.07.2014 - 30.06.2017 |
| izr. prof. dr. Rok Petkovšek | Hybrid high power ps laser | 01.07.2014 - 30.06.2017 |
| prof. dr. Barbara Malič (vodja projekta na UL FS prof. dr. Andrej Kitanovski) | Micro-electromechanical and electrocaloric layer elements | 01.07.2014 - 30.06.2017 |
| prof. dr. Matevž Dular | High fidelity experiments and simulations for understanding and predicting cavitation erosion | 01.07.2014 - 30.06.2017 |
